Dc voltage: 12V
Constant current region: 8.4 ~ 12V
Rated current: 2.5A
Current range: 0 ~ 2.5A
Rated power: 30W
Ripple & noise: 2Vp-p
Voltage adj. range: +/- 10%, Can be adjusted by internal potential meter SVR1
Current adj. range: 3% ~  -25%. Can be adjusted by internal potential meter SVR2
Voltage tolerance: +/- 10%
Line regulation: +/- 3.0%
Load regulation: +/- 10%
Setup, rise time: 1500ms, 150ms / 230VAC    3000ms, 150ms / 115VAC at full load
Voltage range: 90 ~ 264VAC 127 ~ 370VDC
Frequency range: 47 ~ 63Hz
Power factor: PF>0.9/230VAC PF>0.95/115VAC at full load
Efficiency: 83%
Ac current: 0.4A/115VAC 0.2A/230VAC
Inrush current: 40A/230VAC
Leakage current: 0.5mA / 240VAC
Over current: 110 ~ 120%, Protection type : Constant current limiting, recovers automatically after fault condition is removed
Short circuit: Hiccup mode, recovers automatically after fault condition is removed.
Over voltage: 14 ~ 16V, Protection type : Shut down o/p voltage,  re-power on to recover
Over temp.: 90C +/- 10C (TSW1) Protection type : Shut down o/p voltage, re-power on to recover
Working temp.: -30 ~ +50C (Refer to output load derating curve)
Working humidity: 20 ~ 90% RH non-condensing
Storage temp., humidity: -40 ~ +80C, 10 ~ 95% RH
Temp. coefficient: +/- 0.06%/C (0 ~ 50C)
Vibration: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety standards: TUV EN61347-1, EN61347-2-13, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved
Withstand voltage: I/P-O/P:3KVAC
Isolation resistance: I/P-O/P:>100M Ohms / 500VDC / 25C / 70% RH
Emi conduction & radiation: Compliance to EN55015
Harmonic current: Compliance to EN61000-3-2 Class C (>80% load), Class D (>50% load) ; EN61000-3-3
Ems immunity: Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level,  criteria A
Mtbf: 621.4Khrs min. MIL-HDBK-217F (25C)
Dimension: 145*47*30mm (L*W*H)
Packing: 0.22Kg

Mai multe pe site-ul producatorului Mean Well